How To Use; Getting Started - Black & Decker DDCM200 Use And Care Book Manual

Thank you for purchasing our new Dual Coffeemaker, the simple and easy way
to enjoy your favorite cup of coffee on the go. Its innovative design will let
you easily make your choice of coffee or personalize your cup of coffee and
brew it directly into one or two 16-ounce thermal stainless steel mugs that fit
most car cup holders.
Product may vary slightly from what is illustrated.
† 1. Brew basket (Part# DDCM200-01)
† 2. Permanent filter (Part# DDCM200-02)
3. MUG selector
4. Water reservoir
5. Water reservoir cover
6. Water window with mug level markings
† 7. Thermal mug (Part#DDCM200-03)
8. One-mug only position (left side of unit)
† 9. Thermal mug lid (Part#DDCM200-04)
10. On/Off (1/0) switch
†11. Coffee measure (Part#DDCM200-05)
† Consumer replaceable/removables parts
3

How to Use

This product is for household use only.

GETTING STARTED

1. Remove all packing materials and literature.
2. Wash thermal mugs, mug lids, permanent filters and brew baskets in the
dishwasher (top rack) or by hand with warm soapy water. Rinse and dry
all parts.
3. Place unit on a flat surface.
BEFORE BREWING COFFEE
Cycle the unit once with water only to help remove any sediment.
1. Open water reservoir cover (A).
A
2. Fill water reservoir up to the 2 MUGS (MAX) level
(32 ounces) (B). DO NOT FILL PAST THE 2 MUGS
(MAX) LEVEL.
IMPORTANT:
a. If brewing one mug only:
• Make sure to fill with water up to the 1 MUG level
B
ONLY.
• Place mug on the left side.
• Set MUG selector to 1 MUG.
b. If you fill up to the 2 MUGS (MAX) level with mug on the wrong side
and mug selector on the wrong setting, it will cause water to over flow.
3. Close water reservoir cover.
4. To open brew basket, grasp small handle and swing
open (C).
C
5. Insert permanent filter into brew basket (D).
D
4