Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
47855 CompuLevel
6) Always secure the case unit to prevent movement during
measurements – it does not need to be level.
7) Avoid using COMPULEVEL
or temperature. The display will flash 8888 when beyond the +/-20'
vertical range and the CAL will be on steady for temperatures below
-22°F or above +158°F
8) Occasionally check the 4' length of the fully extended unipod for wear
with a tape rule. Adjust its length if necessary.
9) As with conventional instruments, additional errors may be caused
during use outdoors on sunny or windy days. In such conditions pull
out only as much cord as is needed and avoid unnecessary loops over
objects. Measurements are most accurate in early morning, late
afternoon or when overcast, in full shade or indoors. If a measurement
varies when breezy, take the average reading.
COMPULEVEL
COMPULEVEL
TM
reliable performance when properly used. Here are some guidelines:
1) Avoid excessive strain on the measurement module by guiding the
cord with the left hand during use (see page 8)
2) Whenever possible use the protective boot on the measurement
module. Avoid dropping the measurement module and never use
as a hammer.
3) Do not immerse the measurement module in water or any other liquid
or gas and avoid contact with solvents.
4) Minimise COMPULEVEL
scratching display window) or rinsing lightly to remove mud and dirt
from the base unit, cord and measurement module. In extreme cases
the single screw at the back of the reel can be removed to release the
reel from the housing for a thorough hosing.
5) Keep the cord, measurement module or base unit out f the path of
vehicle traffic and out of contact with hot objects such as smouldering
cigarette butts, fresh asphalt or welding.
6) Pack up the COMPULEVEL
time. Never leave out in foul weather or overnight. Avoid storage
inside a hot closed vehicle or trunk.
7) COMPULEVEL
unlikely event that a damaged unit releases liquid or if the cord is cut,
bend over cord and wrap with tape or wire to stop liquid release.
Wipe up liquid with absorbent towels, remove residue with soap and
water and return to factory for service.
23 • Compulevel
TM
Measurement system
6/11/07
11:14
TM
beyond the specified ranges of elevation
TM

Care

is rugged, durable and designed to provide years of
TM
wear by wiping with a damp cloth (avoid
when not in use for extended periods of
TM
TM
contains a non-toxic biodegradable clear liquid. In the
Page 23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents