Smeg DCF01 Original Instructions Manual page 15

KEEP WARM mode
The KEEP WARM mode is activated
automatically after the coffee has been
brewed and keeps the Keep Warm plate
on for 20 minutes.
In this way, the coffee will remain hot for 20
minutes after it has been brewed.
In the KEEP WARM mode, the LED of the
ON/OFF button flashes slowly, the
KEEP WARM
display and the LEDs of buttons
are off.
The ON/OFF
automatically at the end of the KEEP
WARM mode.
The KEEP WARM mode can be stopped
manually at any time by pressing the ON/
OFF button: the LED of the ON/
OFF button and the KEEP WARM
icon turn off.
The KEEP WARM mode is not
activated if the BREW mode is
stopped manually or when the
4 CUPS brewing function has
ended.
36
icon lights up on the
and
button turns off
Use
Setting the time for the AUTO START mode
This setting allows the appliance to be
programmed to switch on automatically to
brew the drip coffee at a time selected by
the user.
To set the time at which the appliance
switches on automatically, proceed as
follows:
1. Make sure that the time displayed is
correct. Otherwise, set the correct time
as described in section "3.1 Before first
use".
2. Press and hold the
seconds to set the automatic start time
mode AUTO START: The LED of the
button and the time display (HH:MM)
start to flash.
3. Move the lever upwards (+) or
downwards (-) to set the time.
4. Confirm the time by moving the lever to
the central position and pressing it (OK):
the appliance beeps.
5. Once set, the time for the AUTO START
will be saved automatically.
button for 3