KERO 262 Instructions For Use Manual page 6

Table of Contents

Advertisement

PREPARING TO LIGHT THE HEATER
Levelling the heater
Make sure that the heater is standing on a level surface. If the heater is not level, the
automatic shut-off device maybe prevented from working.
Automatic shut-off device in case of knocks
Push the ignition lever downwards untill it stops. The automatic shut-off device (in
case of knocks) is ready to work
If the knob does not remain downwards, the automatic shut-off device is working. Do not
try again and ventilate the room.
Wick
The first time you use a wick, let it absorb liquid combustible for mobile heater for about
one hour.
Only use liquid combustible for mobile heater with the aromatics removed, with a flash-
point above 61° and free of any impurities, in order to ensure that your wick lasts for a
long time.
If you find that the wick is abnormally hard, if it is blocked or burning is abnormal, have it
replaced by a qualified specialist, for example, the supplier of your heater.
As the wick and replacement of the wick are not covered by the
guarantee, follow the instructions for use, in order to obtain
optimal performance from your wick.
A non original wick
adjustments causes damage to the combustion quality
with risk of release of carbone monoxide.
would not be anymore NF
Guarantee is not valid without the use of original or PETROWICK
wicks
that does not have the original
59
Your heater

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for KERO 262

This manual is also suitable for:

362

Table of Contents