Troubleshooting Guide - KERO 262 Instructions For Use Manual

In case of problems, check here before you take your heater to your dealer.
Possible cause
Batteries may be
flat or weak
Ignition plug
filament may be
bent or broken
Wick is too low,
too high or
incorrectly installed
Burner is not
operly positioned
Liquid combustible
for mobile heater is
of poor quality or
contaminated with
water
Wick may be dirty
Wick guide
assembly may be
damaged
Wick is not
correctly seated in
wick assembly
Detector of CO2 ■
divice
TROUBLE SHOOTING GUIDE
64
Solution
Replace the batteries.
Replace ignition plug.
Use wick adjustment knob to
adjust wick for proper exposure.
If adjusting the wick fails, reinstall
wick to proper height.
Rotate burner right and left to
position properly.
Replace contaminated or poor
quality liquid combustible for
mobile heater supply.
Clean wick, replace if necessary.
Check wick assembly for proper
seating and general condition.
Replace if necessary.
Reinstall wick correctly in wick
assembly.
■ ■
Air your room, the content CO2 is
too high