ashtech Z-Xtreme Quick Start Manual page 6

To enter the REC INT menu, Tap the ⇓ for 1 second (set display in Edit Mode).
Enter the correct REC INT using the combination of the ⇑ & ⇓ buttons. When each
individual number character is selected, press the ↵ for 1 Second
(Accept Changes).
Repeat this process for each integer in the REC INT.
Once the REC INT is correct, simply bypass this menu by pressing the ⇑ for 1 second.
This will move you into the ELEV MASK: 10 ° menu.
The ELEV MASK: 10° may have been pre-programmed in to the receiver memory.
If this is the case, verify the ELEV MASK is correct per the GPS Project instructions.
If the ELEV MASK is correct, simply bypass this menu by pressing the ⇑ for 1 second.
This will move you to the MODE: STATIC menu.
Leave the receiver in MODE: STATIC.
To escape from this menu, press the ⇑ for 3 Seconds.
This will return you to the MAIN MENU...
You have successfully entered the SITE ID, ANTENNA HEIGHT, and RECORD
INTERVAL.
The physical length of the GPS Observations (Session) will be determined by the GPS
Project Manager, please refer to the GPS Project Instructions.
For additional and complete reference for Z-Xtreme Operations, please consult the
Z-XTREME – OPERATIONS & REFERENCE MANUAL.
Ashtech Part Number – 630843-01 Revision B
6
Thales Navigation: ZX-Static Operations