Installing Of Pedals; Switching On; Managing A Display; Switching On/Off Lights - Xiaomi QiCycle EF1 Overview Manual

Installing of pedals

To install pedals you must use a
wrench (15mm):
Pedal to the left leg tighten
counterclockwise, pedal for the right
foot - clockwise.
Wrench (15мм) Left foot
pedal

Switching on

1. Charging
Before first use of bicycle you must
charge the battery.
2. Switching on
Press and hold for 3 seconds a
button, located at the bottom of
display.
Right foot
pedal
Power button

Managing a display

Top button
Bottom button
Power button
Note: after turning the bike on, you must
wait about 10 seconds to torque sensor
switched to a starting position.
Switching on/off the bicycle
Press and hold a power button for 3
seconds.
Note: If battery level is low, it goes into
sleep mode.
Please promptly charge the battery and
then use a vehicle.

Switching on/off lights

Hold a top button to simultaneously turn on
/ off front and rear lights.
Press and hold a bottom button to turn on /
off a rear headlight.