Schematic representation of accessories
Pedals х 2
Power
adaptor х1
Quick start
Installation (assembly) of a steering tube
Install the steering tube in a vertical position. Make a tight
conjunction between steering pipes and a lower part of the bike.
Lift the latch to secure a position of a steering tube.
Wrench (15мм)
Hex key (5мм) х1
х1
Adjusting a saddle height
stature
Adjusting a tilt of steering
Set a desired angle of a handlebar
and simultaneously tighten two screws
using a hex key (5 mm).
Maximum safe height
Loosen a saddle clamp, and then select an
appropriate position and height of a saddle.
Tighten a clamp of saddle pin. Note that it
should not exceed maximum safe height.
Recommended saddle height: