Stanton RM-406 Owner's Manual page 2

Please read carefully before use of this product
Failure to follow the instructions printed below may void warranty
• Follow all security advice printed on your mixer
• When removing the unit's AC plug from the power source, grasp
and pull the plug, NEVER the cord itself!
• Avoid placing your mixer near heat sources, such as power amplifiers.
• When in use, place your mixer on a stable surface, away from vibration.
Always use care when carrying your mixer. Impact, or heavy vibration may
compromise the unit's mechanical integrity. The manufacturer is not
responsible for damage resulting from an impact, or misuse.
• When in use, place your mixer away from sources of hum or noise, such
as transformers, or electric motors.
• To prevent overheating, always provide your mixer with adequate venti-
lation air space.
• Avoid stepping on your mixer's AC cord. Repeated compression of the
cord may lead to electrical shorting.
• To avoid damage due to AC voltage peaks, always disconnect your mixer
from the power source during electrical storms.
• Your mixer contains no user-serviceable parts except for the crossfader.
The manufactureris not responsible for any damage or personal injury
resulting from unauthorized user-servicing or modifications. In addition,
the warranty will be void if any unauthorized service by the user is detect-
ed. Always return you mixer to an authorized Stanton dealer for servicing..