Stanton RM-406 Owner's Manual page 10

Section G: Mic Controls (continued)
23. Mic-1 XLR Input: Primary connection for a standard balanced (XLR)
microphone.
24. Mic-2 XLR Input: Secondary connection for a standard balanced (XLR)
microphone.
25. Mic-1 1/4" Input: Primary connection for a standard unbalanced (1/4")
microphone.
26. Mic-2 1/4" Input: Secondary connection for a standard unbalanced (1/4")
microphone.
27. Mic-1 Level: Controls the output level (volume) of Microphone 1 only.
28. Mic-2 Level: Controls the output level (volume) of Microphone 2 only.
29. Mic EQ (HIGH): Controls High frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
30. Mic EQ (MID): Controls Mid frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
31. Mic EQ (LOW): Controls Low frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones].
32. Send FX: Turns the FX send ON / OFF for all microphones, and routes
the Microphone signal to the FX Send bus (#3) (for use with external effects
processor / FX Loop.)
33. Mic Selector: Turns the mic(s) On or Off and activates the automatic
Talk-over circuit. When activated, the automatic talk-over circuit reduces the
music output allowing the mic to appear louder than the master audio signal.