Eu Declaration Of Conformity - Link Controls CDO Series Instructions Manual

9.

EU Declaration of Conformity

We hereby declare that the products described below:
CDO-50 / 100 / 150 / 175 / 200 / 275 / 300 / 375 / 400 Door Operator
are in conformity with the essential requirements of the Machinery Directive 2006/42/EC.
In addition, the partly completed machinery is in conformity with the Electromagnetic
Compatibility Directive 2014/30/EU and the Low Voltage Directive 2014/35/EU.
The following standards were applied:
EN 60204-1
EN ISO 12100
EN 12453
EN 12604
EN 61000-6-2
EN 61000-6-3
EN 60335-2-103
The relevant technical documentation is compiled in accordance with Annex VII(B) of
the Machinery Directive 2006/42/EC. We undertake to transmit, in response to a
reasoned request by the market surveillance authorities, this documentation in electronic
form within a reasonable period of time.
Person authorised to compile the relevant technical documentation:
Link Controls, Stuart Road, Manor Park, Runcorn, Cheshire, WA71TS
The machinery is incomplete and must not be put into service until the machinery into
which the partly completed machinery is to be incorporated has been declared in
conformity with the provisions of the Machinery Directive 2006/42/EC.
Place / Date:
Runcorn, 20/04/2016
Manufacturer's signature:
Link Controls Ltd. reserves the right to change / modify products without prior notification
12 – Door Operator / CDO / LC- 3158 Rev.B
02/01/2018
Safety of machinery, electrical equipment of machines - Part 1:
General requirements
Safety of machinery - Basic concepts, general principles for
design
Safety in use of power operated doors - Requirements
Industrial, commercial and garage doors and gates - Mechanical
aspects - Requirements
Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards - Immunity standard for industrial environments
Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for residential, commercial and
light-industrial environments
Particular requirements for drives for gates, doors and windows
Certificate Number 10668
ISO 9001