Sony Cyber-Shot DSC-RX100M3 Help Manual page 378

When you record movies using a smartphone as a remote controller, the monitor of the product becomes darker.
Also, you cannot use the viewfinder for movie recording.
This product shares the connection information for [Smart Remote Embedded] with a device that has permission to
connect. If you want to change the device that is permitted to connect to the product, reset the connection
information by following these steps. MENU →
information, you must register the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are subject to change without
notice.
Related Topic
Connecting an Android smartphone to this product
Connecting the product to an iPhone or iPad
PlayMemories Mobile
(Wireless) → [SSID/PW Reset]. After resetting the connection
Notes on use
4-539-041-13(1)
Copyright 2014 Sony Corporation
Go to Page Top
Go to Page Top
365