Sony Cyber-Shot DSC-RX100M3 Help Manual page 161

Help Guide
How to Use
Digital Still Camera
DSC-RX100M3
Back Back to Top
Using the "Quick Navi"
You can change the settings directly using the Quick Navi screen when using the viewfinder.
1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is set to [For viewfinder].
2. Press Fn (Function) button to switch the screen to Quick Navi screen.
3. Select the desired function by pressing the up/down/left/right side of the control wheel.
4. Turn the control wheel to select the desired setting.
Performing settings on the dedicated screen
Select the desired function in step 3, then press
screen for the function appears. Follow the operating guide (A) to perform the settings.
on the center of the control wheel. The dedicated setting
Print
148