Application Examples; Periodic Status Report; Monitoring Alarm - Ursalink UC1114 User Manual

UC1114 User Guide

5. Application Examples

5.1 Periodic Status Report

Configuration：
Software:
The Ursalink UC1114 will send a custom message at 8 a.m. every Monday.

5.2 Monitoring Alarm

If you need to monitor an alarm sensor, such as a manhole covers sensor or a water pressure
sensor, the Ursalink UC1114 will send out a message when any alarm occurs.
Configuration：
Hardware:
You should connect the alarm output (12V signal that drives the siren) to one of the device's
input. The positive wire from the alarm panel is connected to the IN1 terminal, and the negative
wire is connected to IN1_COM.
21