IDS1000 Container Data Center
User Manual
Procedure
Step 1 Remove the gas extinguisher to be replaced.
Step 2 Install a new gas extinguisher and attach a label to it.
----End
Follow-up Procedure
Send the faulty gas extinguisher together with a Repair Notice to your local Huawei office for
repair.
7.8 Replacing the Emergency Start/Abort Switch
Prerequisites
Tools and Materials
Impact on the System
None
Procedure
Step 1 Use a Phillips screwdriver to remove the screws from the emergency start/abort switch.
Issue 01 (2014-3-15)
The emergency start/abort switch is faulty.
Spare emergency start/abort switches are available.
Phillips screwdriver
Flat-head screwdriver
Spare emergency start/abort switches
Key to the control box
Gloves
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Parts Replacement
53