Quarterly Maintenance - Huawei IDS1000 User Manual

IDS1000 Container Data Center
User Manual
Maintena
nce Item
Gas
pressure of
the fire
cylinder

4.5 Quarterly Maintenance

Maintena
nce Item
Alarm
indicator on
smoke
detectors
Alarm
indicator on
heat
detectors
Audible and
visual alarm
Fire alarm
bell
Issue 01 (2014-3-15)
Operation Expected Result
vessel are installed
securely.
 All nozzle openings
are not blocked.
Observe the The pointer is in the
pointer on the green area.
barometer of
the fire
cylinder.
Operation Expected
Result
Observe the The alarm
alarm indicator indicator blinks
on each smoke once every six
detector. seconds.
Observe the The alarm
alarm indicator indicator blinks
on each heat once every six
detector. seconds.
Trigger a Audible and
smoke detector visual alarms are
and a heat generated.
detector.
Trigger a The fire alarm
smoke detector bell rings.
or a heat
detector.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Routine Maintenance
Troubleshooting
If the pointer is not in the
green area, contact Huawei
technical support.
Troubleshooting
If an alarm indicator blinks twice
every six seconds or does not blink,
the smoke detector is faulty or the
cables are not properly connected.
Connect the cables or replace the
smoke detector. For details, see the
operations described in
Detector Fault.
If an alarm indicator blinks twice
every six seconds or does not blink,
the heat detector is faulty or the cable
is not properly connected. Connect
the cables or replace the heat
detector. For details, see the
operations described in
Detector Fault.
If no alarm is generated, the audible
and visual alarm is faulty or the cable
is not properly connected. Rectify the
fault by following the instructions in
6.4 Audible and Visual Alarm
If the fire alarm bell does not ring,
the alarm bell is faulty or the cable is
not properly connected. Connect the
cable or replace the alarm bell. For
details, see the operations described
in 6.5 Fire Alarm Bell Fault.
6.1 Smoke
6.2 Heat
Fault.
31