Alert Notification; Silence All - Sanyo SprintVision Katana 2 User Manual

Alert Notification

Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call,
when there are incoming messages or voicemail, or when
your network signal is fading.
To set alerts:
1.
Select
2.
Select Service, Voicemail, Messaging, Minute Beep, or
Signal Fade and press
3.
Use your navigation key to select a setting and press

Silence All

There may be times when you need to silence your phone
entirely. The phone's Silence All option allows you to mute all
sounds without turning your phone off.
To activate Silence All:
With the phone open, press the side volume key down
repeatedly in standby mode. (The screen will display
"Silence All.")
Tip:
You can also select Vibrate All to set your phone to vibrate only
(all sounds will be muted).
To deactivate Silence All:
With the phone open, press the side volume key up
repeatedly to select a volume level.
50 Section 2B: Controlling Your Phone's Settings
> Settings > Sounds > Alerts.
.
.