Table of Contents
Advertisement
Programming Voice Dial Tags
To program a voice dial tag:
1.
Select
2.
Select a contact and press
3.
Select a phone number, and then select Options (right
softkey) > Set Voice Tag > Add.
4.
You will be prompted to say the name you want to
program. Say the name after the beep.
5.
Respond to the prompt by repeating the name after the
beep. (The display shows "Voice Tag Recorded.")
Tip:
Record voice dial tags in a quiet environment.
Reviewing Voice Dial Tags
To review voice dial tags:
1.
Select a Contacts entry for which you would like to
review the voice dial tag and press
2.
Select the phone number to which you have added a
voice dial tag, and select Options (right softkey) >
SetVoice Tag.
3.
Select an option and press
Tip:
To erase all voice dial tags you have recorded, see " Erasing
Phone Content"on page 78.
118
Section 2H: Using Your Phone's Voice Services
> Contacts > Find/Add Entry.
Play to play the recorded voice dial tag.
Play:Speaker to play the recorded voice dial tag in
speakerphone mode.
Change to change the recorded voice dial tag.
Erase to erase the recorded voice dial tag. Select Yes
to erase; select No to cancel.
.
.
.
Advertisement
Table of Contents
