Table of Contents
Advertisement
Using Voice-Activated Dialing
In addition to Sprint Voice Command (see page 196), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Note:
Please set the Voice Prompt feature (see page 47) to on
before using the Voice-Activated Dialing so that you can
hear the voice instruction from the phone. The default
setting is off.
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1.
Press and hold
2.
Follow the system prompts and recite the entry's Voice
Dial tag into your phone's microphone.
Note:
To use the Voice Dial function, you must have stored Voice Dial
entries. (See "Programming Voice Dial Tags" on page 118.)
Tip:
You can also make a call using voice-activated dialing with
the phone closed. Press and hold the side volume key up or
down while in standby mode, and follow the voice prompts.
Section 2H: Using Your Phone's Voice Services
.
117
Advertisement
Table of Contents
