Advertisement
Quick Links
I N S T R U C T I O N M A N U A L
KEPCO
1. DESCRIPTION
Kepco KIT 219-0628 contains a front panel assembly that includes a color display and keypad which is used to
upgrade BOP 1KW-GL and -EL models to -MGL and -MEL models, respectively.
2. APPLICABILITY
This KIT applies only to models listed in Table 1.
3. INSTALLATION INSTRUCTIONS
3.1 MATERIAL REQUIRED (See Table 2.)
Front Panel Assembly
Instruction Manual Kepco P/N 228-1917
Phillips Screw Driver
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
©2019, KEPCO, INC
Data subject to change without notice
An ISO 9001 Company.
BOP 1KW-GL, EL TO MGL, MEL
FRONT PANEL RETROFIT KIT
TABLE 1. APPLICABILITY
MODEL
BOP 10-100GL
BOP 10-100EL
BOP 20-50GL
BOP 20-50EL
BOP 36-28GL
BOP36-28EL
BOP 50-20GL
BOP 50-20-EL
TABLE 2. MATERIAL REQUIRED
MATERIAL
www.kepcopower.com email: hq@kepcopower.com
228-1917 REV 1
BOP 1KW
-GL, -EL TO
-MGL, -MEL
KIT 219-0628
KIT PART NUMBER
KIT 219-628-1G
KIT 219-628-1E
KIT 219-628-2G.
KIT 219-628-2E
KIT 219-628-3G.
KIT 219-628-3E
KIT 219-628-5G.
KIT 219-628-5E
LOCATION
Provided in this Kit
Provided in this Kit
Not Supplied
QUANTITY
1
1
N/A
1
Advertisement
Related Manuals for KEPCO BOP 1KW-GL Series
Summary of Contents for KEPCO BOP 1KW-GL Series
- Page 1 BOP 1KW-GL, EL TO MGL, MEL FRONT PANEL RETROFIT KIT 1. DESCRIPTION Kepco KIT 219-0628 contains a front panel assembly that includes a color display and keypad which is used to upgrade BOP 1KW-GL and -EL models to -MGL and -MEL models, respectively. 2. APPLICABILITY This KIT applies only to models listed in Table 1.
-
Page 2: Disassembly Procedure
1. Unwrap new front panel supplied in this kit. 2. Use the wrapping material to wrap the front panel removed in PAR. 3.2 and ship back to Kepco for credit. 3. Insert circuit breaker removed in PAR. 3.2 into new front panel. - Page 3 7. Attach the two mounting ears to the chassis using three screws for each. 8. Install the power cord, connect the unit to source power, turn on power supply KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102 www.kepcopower.com email: hq@kepcopower.com...
-
Page 4: Setup Before Use
General Setup menu. 2. Highlight Password and press 3. Press to reset passwords to the defaults: Admin 2 password is set to “KEPCO,” the Main Unit password is set to ”DEFAULT,” and the Admin 1 password is not assigned. 4. Press to save for power up. - Page 5 -GL, -EL SERIES CHASSIS (COVER REMOVED) FIGURE 1. ASSEMBLIES A1, A4A3 AND A6A1 COMPONENT LOCATIONS KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102 www.kepcopower.com email: hq@kepcopower.com 101719 228-1917 REV 1...
- Page 6 3044404 FIGURE 2. BOP 1KW -MGL, -MEL AFTER RETROFIT COMPLETE KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102 www.kepcopower.com email: hq@kepcopower.com 228-1917 REV 1 101719...