(2)
Wavelength Selection/Wavelength Identify
Short press this key to switch the wavelength and display it on the top left of
the LCD screen, 1310nm is the default wavelength
Press the
upper right of screen have "AU", and also long press this key to quit this
function.
(3)
Backlight Control (two mode of back light control, press this key to
choose one mode):
"LDR" the intelligent backlight control mode. Power meter will off/on the
backside in 15 seconds based on the outside light condition, and this is
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
F i b e r O p t i c S o l u t i o n s P r o v i d e r
for 2 seconds, enter into wavelength auto-identify, on the
4/54