Sun Microsystems SUN-OPM200 Series User Manual page 16

4-7 FC connector
Notice: When change the optical connector, take care for the
connector and the end-face. FC connector can connect with FC
adaptor; Φ2.5mm universal connector can connect with FC, SC,
and ST adaptor. Pic 4-9
FC Patch Cord
Notice: the tinny dust on the connector will affect the accurate of
the measurement value, so please clean the connector and the
patch cord end-face before the test.
Use the alcohol and the cotton swab to clean the connector. Dip the cotton
swab with alcohol, insert the cotton swab in the connector, slightly rotating
the cotton swab, after that change a dry cotton swab and clean it again. Pic.
4-10.
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
F i b e r O p t i c S o l u t i o n s P r o v i d e r
4-8 Φ2.5mm universal connectors
SC Patch Cord ST Patch Cord
4-9
11/54