Advertisement
Available languages
Available languages
INC-4036BF
Order No. 18.0128
ELECTRONICS FOR SPECIALISTS
ELECTRONICS FOR SPECIALISTS
When a connection to the camera has been established, the view with the
current camera image (fig. 3) will be displayed. The following options are
available:
a View "Live Video" with display of camera image
b View "Playback" (without function for this camera model)
c View "Configuration" to change the camera settings
d Button
to change the password
e Button
to log out
f Camera image with information on the stream currently transmitted
g Toolbar with the following functions:
/ : Stop / Start of image transmission
"Stream": Selection of a stream
: Specific camera settings (e. g. brightness control, mirror image)
: Snapshot function to save a snapshot as an image file
: Starting / Stopping a video recording on the PC
: Activation / Deactivation of image analysis functions ("Intelligent Anal-
ysis")
When the camera image is clicked with the right mouse button, the follow-
ing menu will appear:
Menu item
full-screen image (exit)
Full Screen (Exit Full Screen)
alternatively: double-click the image
Sensor
like
zooming in / zooming out
Zoom In / Out
alternatively: use the scroll wheel to zoom in / out or drag the
mouse to select the desired image section
Restore Panorama
display of the entire image (after zooming in)
To change the settings for the camera, select the tab c and go to the view
fig. 4). On the left ( h ), select the desired category for
"Configuration" (
☞
the settings. To show additional subcategories, click ⊞. To set, for example,
the current time for the camera, go to "Device Date and Time".
To save a setting that has been changed, click the green check mark ✔
or the button "Apply". To load the current settings from the camera, click
the button "Refresh".
6.1 Sensor menu
To activate the sensor menu (fig. 5), click the icon
➄
Sensor menu
Select the mode in the list field at the bottom on the left. To change the
settings, select "Debug Mode". The settings made in the sensor menu can
be saved with "Save" (Schemes 1 – 4) and retrieved (selection via second
list field). It is possible to define an individual validity period for each of the
settings saved (view "Time Segment"). This will allow you, for example, to
make different settings for day and night.
To reset the settings to the values saved, click "Reset". To reset the set-
tings to the factory settings, click "Factory Setting".
ELECTRONICS FOR SPECIALISTS
Function
.
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
by MONACOR INTERNATIONAL. All rights reserved.
©
ELECTRONICS FOR SPECIALISTS
ELECTRONICS FOR SPECIALISTS
The setup options of the sensor menu can be found in the table below.
View
Setting
Enable
Time Segment
Start Time
End Time
Brightness
Saturation
Image
Sharpness
Contrast
Scene
Aisle
Scene
Mirror
Exposure
Shutter, Gain
WB
Mode, Red, Blue white balance
Day Night
Mode, IR LED
Noise Reduction
2D NR, 3D NR
WDR, HLC, BLC,
Enhance Image
Anti-Shake,
Defog
7 Resetting the Camera
When the camera is reset to its factory settings, any changes the user has
made to the camera settings will be lost. Keep the reset button (1) pressed
for more than 5 seconds. The camera will be restarted* and reset to the
static IP address 192.168.0.120. The default user name and the password
for log-in is: admin.
*Note: Starting the camera may take a few minutes.
8 Specifications
Image sensor: . . . . . . . . . CMOS, 8.5 mm (1⁄3 ")
Lens: . . . . . . . . . . . . . . . . 3.6 mm / 1 : 1.2
Viewing angle: . . . . . . . . 85°
Minimum illumination: . . 0.01 lx (colour)
Range of IR LEDs: . . . . . . 30 m
Resolution: . . . . . . . . . . . 30 frames max. per second with
Electronic shutter: . . . . . . 1⁄5 – 1/20 000 s
Protocols: . . . . . . . . . . . . IPv4, IPv6, HTTPS, RTSP, DDNS, SMTP, SSL,
Compression: . . . . . . . . . MPEG-4 H.264 / H.265, MJPEG
Video streaming: . . . . . . . Mainstream 500 – 12 000 kbit /ss
Network: . . . . . . . . . . . . Ethernet 10 / 100 Mbit / s
Ambient temperature: . . −30 °C to +60 °C
IP rating: . . . . . . . . . . . . . IP 67
Power supply: . . . . . . . . . ⎓ 12 V/420 mA or PoE IEEE 802.3af
Dimensions (W × H × D): 70 mm × 60 mm × 169 mm
Weight: . . . . . . . . . . . . . 470 g
ELECTRONICS FOR SPECIALISTS
Function
activation of the validity period defined for these
settings (Scheme)
start of validity period
end of validity period
brightness
saturation
sharpness
contrast
place of application
aisle mode
mirror image: off, horizontal, vertical, horizontal and
vertical
exposure settings
day/night switching, infrared LED illumination
noise reduction
image enhancement
2592 × 1520 pixels
ONVIF 2.6 etc.
Substream
100 – 6000 kbit /s
Subject to technical modification.
A-1969.99.01.05.2019
ELECTRONICS
Advertisement
