Table of Contents
Advertisement
G5 Power Button and Knob
The G5 display will power on with the application of aircraft power. The G5 power button is used to turn the
display on and off. Press and hold the power button to turn the display off.
The knob performs the following functions:
Press to access the Menu.
From the Menu, press to select the desired menu item.
Press
Press to accept the displayed value when editing numeric data or selecting from a list.
Press to sync the heading or track bug for the HSI.
From the Menu, turn the Knob to move the cursor to the desired menu item.
For the ADI, rotate to adjust the baro setting on the secondary altitude display.
Turn
For the HSI, rotate to adjust the heading or track bug.
Turn to select the desired value when editing numeric data or selecting from a list.
Backlight Intensity Adjustment
The power up state of the G5 backlight is in Auto adjustment mode.
To adjust the backlighting:
To select Manual mode from Auto mode:
1. While the unit is turned on, press the Power button.
2. Turn the knob to manually adjust the backlight intensity.
3. Press the knob to close the backlight page.
To select Auto mode from Manual mode:
1. While the unit is turned on, press the Power button.
2. Press the Power button again to select Auto.
3. Press the knob to close the backlight page.
Prior to Flight in Instrument Meteorological Conditions
1. Press the Power button on the G5 attitude indicator.
2. Verify the battery status indicator is green on the G5 attitude indicator.
190-01112-13 Rev. 5
SECTION 4 – NORMAL PROCEDURES
AFMS, Garmin G5 AML STC
Page 4–1
Advertisement
Chapters
Table of Contents
