Digital Equipment DECstation 5000 Upgrade Instructions page 6

Turn Off/Open the DECstation
1. Turn off the DECstation system by
pressing O on the on/off switch on the
back of the system unit. Wait 15 seconds
for the monitor to discharge.
2. Disconnect all the cables from the back
of the system unit.
3. Loosen the cover-release screw on the
back of the system unit. This captive
screw can be loosened but not removed.
0
1
2
Captive
Screw
4. Grasp each side of the cover with your
hands, and pull the cover straight toward
the front about 2 inches (5.5 cm). Pull
the cover up and set it aside.
CAUTION: To avoid damage from static
discharge, always wear an antistatic wrist
strap when working inside the system unit.
MLO-010006