Starting The Engine - Toro HoverPro 400 Operator's Manual

Starting the Engine

1. Open the fuel tank vent by turning the vent knob
at least 2 or 3 turns counterclockwise.
2. Turn the fuel valve to the O
g017375
Figure 12
1. Fuel valve
3. Hold the operator-presence control against the
handle.
1
g017334
Figure 13
1. Handle
4. Place your foot on the deck and tilt the machine
toward you (Figure
position (Figure
N
2. Operator-presence control
14).
12).
1
g017329
5. Pull the recoil-start handle.
Note:
Do not allow the starter grip to snap back
g017375
against the engine. Return it gently to prevent
damage to the starter.
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
2
g017334
11
Figure 14
g017329