programs.
CONNECTING THE ANTENNA
Your transceiver comes with a flexible antenna. You must connect an
antenna to your transceiver before you transmit. The transceivers BNC
antenna connector is easy to connect other types of antennas. Radio Shack
stores sell a 5/8 wave magnetic mount antenna for mobile operation (Cat.
No. 19-210), a discone antenna (Cat. No. 20-013), and a center-loaded
telescoping whip antenna (Cat. No.20-006) that you can use with your
transceiver.
To use the supplied antenna, slip the antenna's connector over the BNC jack
and twist the antenna to lock it in place.
To use an external antenna, if necessary, attach the appropriate connector
adapter to the end of the antenna cable. Then, slip the connector over the
BNC jack and twist the connector to lock it in place.
WARNING: When installing or removing an outdoor antenna, use extreme
caution. If the antenna starts to fall, let it go! It could
contact overhead power lines. If the antenna touches the power
line, contact with the antenna, mast, cable, or guy wires can
cause electrocution and death! Call the power company to remove
the antenna. Don't attempt to do so yourself.
ATTACHING THE BELT CLIP
You can attach the provided belt clip to your transceiver. Use the
supplied screws.
ATTACHING THE HAND STRAP
Loop the supplied hand strap's key ring through the hand strap tab.
USING AN EXTERNAL MICROPHONE
You can use an external microphone with your, transceiver. When you