Table of Contents
Advertisement
Temp reduction
The suds temperature can be reduced
to prevent the suds from boiling too
early in high-altitude locations (over
3000 m).
Factory default: Off
If disinfection programmes are to be
used, the required temperature may
not be reached.
Do not switch on the
tion
setting when disinfection pro-
grammes are switched on.
Disinfection prog. code
A code has to be entered to cancel a
disinfection programme. The code can
be modified.
The code is:
0 0 0
Tip: Make a note of your new code if
you ever change it.
Temp reduc-
Supervisor level
Auto load control
This washing machine comes with
automatic load control. In some pro-
grammes, the water levels and the
programme cycle times are adapted to
the load. If the auto load control is de-
activated, the machine will always
carry out the programme sequence
based on a full load.
Factory default: On
CapDosing
You can choose whether
displayed in the Further choices list.
Factory default: On
Pre-ironing
You can choose whether
displayed in the Extras list.
Factory default: On
CapDosing
is
Pre-ironing
is
85
Hide quick links:
Advertisement
Table of Contents
