Table of Contents
Advertisement
Language
The display can be set to appear in
one of several different languages. To
select the permanent operator lan-
guage you want, go to the Languages
sub-menu.
When a programme is running, you can
change the user language using the
sensor.
Brightness
The brightness of the display can be
set in intervals of ten from 10 % to
100 %.
Factory default: 70 %
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock (factory default)
– 12 h clock
– Clock off
Set
– The time of day can be set.
Finish tone volume
The volume can be changed for the
buzzer that sounds at the end of the
programme.
It can be set to one of 7 different levels
or switched off altogether.
Factory default: Off
Supervisor level
Keypad tone volume
The volume of the tone that sounds
when a sensor is touched can also be
changed.
It can be set to one of 7 different levels
or switched off altogether.
Factory default setting: normal
Welcome tone volume
The volume of the welcome tone that
sounds when the washing machine is
switched on can be changed.
It can be set to one of 7 different levels
or switched off altogether.
Factory default setting: normal
Fault alarm
The tone that sounds in the event of a
fault can be switched on or off.
Factory default: Off
Memory
The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
When the programme is chosen again,
the saved settings will appear in the
display.
Factory default: Off
79
Hide quick links:
Advertisement
Table of Contents
