E-Mu Planet Phatt Operation Manual page 97

You have just connected the Auxiliary Envelope Generator to the
Filter Cutoff as shown in the diagram below.
Instrument
Tone
Now go back to the Aux Envelope screen.
Move the cursor underneath the envelope amount and change the
value to about +100. Now when you press a key the filter will slowly
sweep up. Because the filter Q is set high, you can hear the different
harmonics of the sound being accentuated as the filter cutoff sweeps
past.
Now, scroll back to the Auxiliary Envelope parameter screen.
Change the attack rate and note the change in the sound. The diagram
below shows approximately how the envelope looks when the param-
eters are set as shown above.
time
Filter
Fc Q
Aux. AHDSR
AUX ENV AMT DLY
+100 000
A: A H D S
15 00 00 99 50
Sustain Level
Chapter 6: Step-By-Step
DCA Pan
R
STEP-BY-STEP
R
L
••• Note that all the enve-
lope parameters are Rates
except for Sustain, which is
a Level.
89