E-Mu Planet Phatt Operation Manual page 119

RECEIVED CHANNEL COMMANDS
Channels number (n) = 0-15. Message bytes are represented in hex. All
other numbers are decimal. Running Status is supported.
Command
Note Off
Note On
Key Aftertouch
Program Change
Channel Aftertouch
Pitch Bend
Realtime Controller
Footswitch
Volume
Pan
All Sound Off
Reset All Controllers
All Notes Off
Omni Mode Off*
Omni Mode On*
Mono Mode On (Poly Off)*
Poly Mode On (Mono Off)*
Bank Select
* Special Notes:
From Omni Mode ... Omni Off turns Poly On.
From Poly Mode ..... Omni On turns Omni On; Mono On turns Mono On.
From Mono Mode ... Mono Off turns Poly On; Omni On turns Omni On.
From Multi Mode ... Omni On turns Omni On; Omni Off or Mono Off
turns Poly On; Mono On turns Mono On.
All other changes have no effect.
Message
8n kk vv release velocity is ignored
9n kk vv
An kk vv
Cn vv
Dn vv
En ll mm
Bn cc vv
Bn cc vv
Bn 07 vv
Bn 0A vv 0=left, 127=right, 64=center
Bn 78 00
Bn 79 00
Bn 7B 00
Bn 7C 00 forces all notes & controls off
Bn 7D 00 forces all notes & controls off
Bn 7E 00 forces all notes & controls off
Bn 7F 00 forces all notes & controls off
Bn 00 00 20 bb
Chapter 7: Reference Section
MIDI SPECIFICATIONS
Comments
velocity 0 = note off
kk = 0-127 vv = 0-127
vv = 0-127
vv = 0-127
l = lsb, m = msb
cc = 00-31, vv = 0-127
cc = 64-79, vv ≥ 64 = on
vv = 0-127
turns all sound off
ignored in omni mode
ignored in omni mode
bb = bank #
••• Running Status is
supported in Planet Phatt.
111