Beats Mode; Demo Sequence - E-Mu Planet Phatt Operation Manual

• Beats Mode

There are four options when in Beats mode: Factory Settings, Constant
Tempo, Constant T, X, P and User Settings. These modes affect the
way Planet Phatt responds to parameter changes in Beats Mode. The
characteristics of each mode are detailed below.
Factory Settings ........ The Tempo, X Factor (transpose) and Preset are
1:Constant Tempo .... The Factory settings of Preset and X Factor will
2:Constant T, X, P ..... Tempo, X Factor and Preset are user-adjustable
3:User Settings ......... All Beat parameters (Tempo, X-Factor, Preset) are

• Demo Sequence

Planet Phatt contains a play-only demo sequencer to give you an idea
of what is possible using this Phantastic machine. Press either cursor
key to move the cursor to the lower line of the display and press Enter.
The Demo Select screen will appear and the first sequence will begin
playing. All four sequences will play in sequential order. Use the
cursor keys to select a particular sequence. Pressing the Enter button
again will stop the sequence and return you to the first Demo screen.
DEMO SEQUENCE
Start
preset at the factory. These can be changed, but
any changes are lost when the beat number is
changed.
be used whenever a new beat is selected, but the
Tempo can be user-adjusted and will remain
constant when new beats are selected.
and will remain constant when new beats are
selected.
user-adjustable and are immediately saved to
non-volatile RAM. These user settings remain
stored in RAM even if another Beats mode (such
as factory settings) has been selected.
BEATS MODE
Factory Settings
DEMO
ENTER=Stop >=Next
Chapter 3: Master Menu
1 2 3 4
MASTER MENU
33