• Footswitch Control
This function allows you route the 3 footswitch controllers (1, 2 or 3)
to any of the footswitch destinations. The footswitches can be routed
to switch: Sustain (pri/sec/both), alternate volume envelope (pri/sec/
both), alternate volume release (pri/sec/both), or cross-switch between
the primary and secondary instruments.
• Pitch Bend Range
This function allows you to specify the pitch wheel range for the
current preset or it can be set to be controlled globally (set in the
Master menu). Pitch bend range is only applied when the pitch wheel
is used to control pitch.
• Pressure Amount
This function allows you to specify an amount parameter for mono or
poly keyboard pressure data. The pressure amount is variable from
-128 to +127.
• MIDI Controller Amount
This function allows you to specify an amount parameter (variable
from -128 to +127) for each of the MIDI controllers.
CONTROLLER AMT
A:+127
B:-090
FOOTSWITCH CTL
1 -> Sustain
PITCH BEND RANGE
+/- 12 semitones
PRESSURE AMOUNT
+127
CONTROLLER AMT
C:+030
D:+060
Chapter 5: Edit Menu
EDIT MENU
75