Table of Contents
Advertisement
F
If the cover of the interchange
unit is attached, remove it by slid-
ing it out toward the back of the
printer.
Note
If the cover of the interchange
unit is already removed, go to
step G.
The removed cover is no longer
required.
G
Hold the mailbox on both sides
and insert it into the printer from
the top side of the printer.
H
Fasten the two screws by hand
and secure the mailbox to the
printer. Use a coin to fasten the
screws securely.
I
Close the right cover by pushing
the area as shown in the illustra-
tion.
ZAEP710E
J
If the duplex unit is already at-
tached, close the unit.
K
Slide the four mailbox output
trays into the lower side of the
mailbox first.
ZAEP340E
Installing Options
1
ZAEP350E
ZAEP690E
ZAEP360E
23
Advertisement
Table of Contents
