KitchenAid KEK1032 Manual page 9

USING THE PRECISION KETTLE
If you feel the flow control is too easy
or too hard to move, use your fingers
3
to adjust the tab on the flow control
lever. Push in to create less tension;
pull out to create more.
FILLING THE PRECISION KETTLE WITH WATER
Remove lid from the Precision Kettle
1
and fill with water.
NOTE: Do not fill past the MAX fill line of
1 liter.
IMPORTANT: There must be a minimum
of 1 cup (.25 L) of water for the Precision
Kettle to operate. If the water level drops
below this point, the Add Water icon will
light, and you will need to add water to
the Kettle before continuing use.
Test the flow control to see if the
4
tension is correct; continue to adjust
if needed.
Replace the lid and put the Precision
2
Kettle back on the base.
USING THE PRECISION KETTLE | 9