Symbol Conventions; Important User Information - Pulseroller ConveyLinx-Ai2 User Manual

S C
YMBOL ONVENTIONS
This symbol indicates that special attention should be paid in order to ensure correct use as
well as to avoid danger, incorrect application of product, or potential for unexpected
results
This symbol indicates important directions, notes, or other useful information for the
proper use of the products and software described herein.
I U I
MPORTANT SER NFORMATION
ConveyLinx-Ai2 modules contain ESD (Electrostatic Discharge) sensitive parts and
components. Static control precautions are required when installing, testing, servicing or
replacing these modules. Component damage may result if ESD control procedures are not
followed. If you are not familiar with static control procedures, reference any applicable
ESD protection handbook. Basic guidelines are:
•
•
•
•
•
•
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy themselves
that all necessary steps have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws, regulations, codes,
and standards
The illustrations, charts, sample programs and layout examples shown in this guide are
intended solely for purposes of example. Since there are many variables and requirements
associated with any particular installation, Insight Automation Inc. does not assume
responsibility or liability (to include intellectual property liability) for actual use based on
the examples shown in this publication
Reproduction of the contents of this manual, in whole or in part, without written
permission of Insight Automation Inc. is prohibited.
Touch a grounded object to discharge potential static
Wear an approved grounding wrist strap
Do not touch connectors or pins on component boards
Do not touch circuit components inside the equipment
Use a static-safe workstation, if available
Store the equipment in appropriate static-safe packaging when not in use

Important User Information

Publication ERSC-1006 Rev 1.4 – October 2017
5