Advertisement
Adding Device through Network
1.
Power the SmarterHome device ON and follow the product-specific instructions to
enter the Wi-Fi-connect mode.
2. Open Kogan SmarterHome app and tap "+" in the upper right to add a new device
through the network.
3. Select the type of device you want to connect to on the next screen.
4. Ensure the device's indicator light rapidly flashes and tap "Confirm light is rapidly
flashing".
5. Select Wi-Fi network (Note: Network must be 2.4GHz band) and enter the password.
The device will commence the pairing process and connect to the app.
•
If needed, short press '3' & '#' on the lock to verify the administrator.
•
During connection, the LED for '8' will flash quickly.
•
The Wi-Fi network of the app and device should be the same.
6. After successfully configuring the devices, the device will be shown on the home page.
Tap to enter its control page.
•
Once added successfully, a voice will sound saying 'Added successfully'.
•
If addition has failed, an LED light will show 'X' and a voice will sound saying
'Add failure'. Please try to connect the unit again if this occurs.
8
Advertisement
