Advertisement
5. Installing Lock Body
5.1 Choose the installation direction of the latch-bolt of the lock body according to the door
opening direction.
5.2 Change the direction of the lock body.
a. Push the reversing block to the other side.
b. Push the latch-bolt into the lock and turn it 180 degrees.
c. Put back the reversing block and the latch-bolt will pop up automatically.
5.3 Put the lock body into the door frame and tighten with 2 fixing screws.
6. Choose the Parts
Choose suitable parts according to the following table:
Door thickness
Square steel
length
4-5.5cm
8cm
5.5-6cm
8cm
7-8cm
10cm
9-10cm
12cm
>10cm
14cm
(Optional)
Connection column
length
3.5cm
5.5cm
5.5cm
5.5cm
5.5cm
4
Connection column
screw length
3cm and 5cm
3cm and 5cm
5cm and 7cm
7cm and 9cm
9cm and 11cm
Advertisement
