Advertisement
Installation
Note: Please have a Phillips-head screwdriver and 4x AA batteries on hand before installation.
1.
It is recommended to have this installed by a professional.
2. Please note that the connection line shouldn't be pressed, bent or folded during
installation.
3. Before the installation, ensure the lock is suitable for the door, or the direction of the
handle must be adjusted according to the door opening direction.
4. While installing, the door must be in a half-open state until the installation is complete.
5. After the installation is complete, test whether the front handle and back handle
unlock/lock normally.
6. If it does not work properly, please check if there has been an error during installation.
1. Installation Overview
1
Front panel
2
Connection column
3
Square steel
4
Lock body
5
Connection line
6
Back panel
7
'SET' button
8
Connection column screws
9
Battery cover
10
Battery cover screw
11
Back handle
12
Connection column screws
13
Reverse lock knob
14
Back locking paddle
15
Deadbolt
16
Latch-bolt
17
Lock body screws
18
Connection column
19
Keyhole
20
Emergency power port
21
Front handle
2
Advertisement
