Advertisement
7. Installing the Lock
7.1 Installing the Front Panel
a. Install 2 connection columns on the front panel.
b. Adjust the dot direction on the square steel sleeve with reference to the sticker on the
rubber mat
a. Left open- keep the dot left or right
b. Right open- keep the dot at the top or bottom
c. Insert the suitable square steel into the lock body.
d. Pass the connection line through the door hole.
e. Align the square steel with the square steel hole of the front panel and fix the front
panel on the door, then press the other end of the square steel.
7.2 Installing the Back Panel
5
Advertisement
