NETGEAR ProSafe Quad WAN FR538G Reference Manual page 83

(Inbound). The default outbound policy can be changed to block all outbound traffic and enable
only specific services to pass through the router by adding an Outbound services Rule.
Figure 4-5
To change the Default Outbound Policy:
1. Select Security from the main menu, Firewall Rules from the submenu and then select the
DMZ WAN Rules tab. The DMZ WAN Rules screen will display.
2. Click Add under the Outbound Services table. The Add DMZ WAN Outbound Services
screen will display.
3. Accept the default settings to block all services or select a specific service to block from the
Services pull-down menu.
4. Click Apply. The Block Always rule will appear in the Outbound Services table. The rule is
automatically enabled.
Firewall Protection and Content Filtering
ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
v1.0, November 2007
4-11