NETGEAR ProSafe Quad WAN FR538G Reference Manual page 124

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
• If you want to make the quad WAN gigabit firewall globally accessible using the
community string, but still receive traps on the host, enter 0.0.0.0 as the Subnet Mask and
an IP Address for where the traps will be received.
3. Enter the trap port number of the configuration in the Port field. The default is 162.
4. Enter the trap community string of the configuration in the Community field.
5. Click Add to create the new configuration. The entry will display in the SNMP
Configuration table.
6. Click Edit in the Action column adjacent to the entry to modify or change the selected
configuration.
The SNMP System Info link displays the quad WAN gigabit firewall identification information
available to the SNMP Manager: System Contact, System Location, and System name.
To modify the SNMP System contact information:
1. Click the SNMP System Info link. The SNMP SysConfiguration screen will display.
2. Modify any of the contact information that you want the SNMP Manager to use.
3. Click Apply to save your settings.
Figure 5-3
5-12
v1.0, November 2007
Router and Network Management