Start/Pause ( ) And Add Clothes ( ) Touchpad; Before First Use - Electrolux EWW8023AEWA User Manual

Hide thumbs Also See for EWW8023AEWA:
Table of Contents

Advertisement

Available languages

Available languages

Error warning beeps such as critical
faults are not disabled.
To disable the buzzer sound, press
"Vapour (
at the same time about 3 seconds,
the icon "
along with buzzer sound.
To return to default configuration press
these 2 touchpads at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
3.6 Start/Pause (
Add Clothes (
This touchpad has 2 functions:
1.
Start/Pause (
After you have selected the desired
program and options, press this
touchpad to start the machine. The
Start/Pause pilot light will stop flashing
and remain lit until the water level is
above the bottom edge of the door
then pilot light goes OFF.
4.

BEFORE FIRST USE

NOTE
During installation or before first use
you may observe some water in the
machine. This is a residual water left in
the machine after a full functional test
in the factory to ensure the machine is
delivered to customers in perfect
working order and is no cause for
concern.
1.
Ensure that the electrical and water
connections comply with the
installation instructions.
2.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
) and Prewash" touchpads
" will show on display
) and
) Touchpad
)
If you have selected a "Delay Start"
option, the countdown will begin and
will be shown on the display.
To interrupt a program which is
running, press this touchpad to pause
the machine, the Start/Pause pilot light
flashes.
To restart the program from the point
at which it was interrupted, press this
" will
touchpad again, the Start/Pause pilot
light will stop flashing.
2.
Add Clothes (
You can only add clothes when
the icon "
display.
To add clothes:
1.
Pressing the "Start/Pause"
touchpad to pause the program.
2.
Wait for the machine to come to a
complete stop before opening the
door (wait for door lock "
to turn off).
3.
Add clothing and close the door.
4.
Resume the program by pressing
"Start/Pause" touchpad again.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
ENGLISH
17
)
" shown on the
" icon

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents