Start/Pause ( ) And Add Clothes ( ) Touchpad; Before First Use - Electrolux EWW1042Q7WB User Manual

Error warning beeps such as critical
faults are not disabled.
To disable the buzzer sound, press
"SensorWash (
Care (
time about 3 seconds, the icon "
will show on display along with buzzer
sound.
To return to default configuration
press these 2 touchpads at the same
time about 3 seconds, the icon "
will show on display along with buzzer
sound.
3.6 Start/Pause (
Add Clothes (
This touchpad has 2 functions:
1. Start/Pause (
After you have selected the desired
program and options, press this
touchpad to start the machine. The
Start/Pause pilot light will stop flashing
and remain lit until the water level is
above the bottom edge of the door
then pilot light goes OFF.
4.

BEFORE FIRST USE

NOTE
During installation or before first use
you may observe some water in the
machine. This is a residual water left in
the machine after a full functional test
in the factory to ensure the machine is
delivered to customers in perfect
working order and is no cause for
concern.
Ensure that the electrical and water
1.
connections comply with the
installation instructions.
2. Put 2 litres of water in the detergent
compartment for washing phase. This
activates the drain system.
)" and "Hygienic
)" touchpads at the same
) and
) Touchpad
)
If you have selected a "Delay Start"
option, the countdown will begin and
will be shown on the display.
To interrupt a program which is running,
press this touchpad to pause the machine,
"
the Start/Pause pilot light flashes.
To restart the program from the point at
which it was interrupted, press this
touchpad again, the Start/Pause pilot
light will stop flashing.
"
2. Add Clothes (
You can only add clothes when
the icon "
display.
To add clothes:
1. Pressing the "Start/Pause"
touchpad to pause the program.
2. Wait for the machine to come
to a complete stop before opening
the door (wait for door lock "
icon to turn off).
3. Add clothing and close the door.
4. Resume the program by pressing
"Start/Pause" touchpad again.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
19
ENGLISH
ENGLISH 19
)
" shown on the
"