Cable-Power - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 Wiring
4.5

CABLE-Power

Name:
Application:
Length:
Order numbers:
Picture 12 CABLE-Power
This cable is used for energy supply of the IFN. To forward the power from the first IFN
to the following ones in a line topology IFN ADD must be applied, see. chapter 4.6.
Warning
The IFN device is built to operate with reliable low voltage. Therefore only reliable low voltage
according to IEC950/EN60950/VDE0805 must be connected to the supply connection.
The power adapter for feeding the IFN must fulfil NEC Class 2 (voltage range 18-32 V).
The IFN must not be connected to DC voltage higher than 32 V DC, or to AC voltage.
SIPLUS CMS4000 Cable
Operating Instructions, 06/2017, A5E02298098B-01
CABLE-Power
Power cable
IFN
135cm, 200cm, 500cm, 1000cm
CABLE-Power-135-0000 (135 cm)
CABLE-Power-200-0000 (200 cm)
CABLE-Power-500-0000 (500 cm)
CABLE-Power-1000-0000 (1000 cm) 6AT8000-2AB30-1AB0
6AT8000-2AB30-1AA1
6AT8000-2AB30-1AA2
6AT8000-2AB30-1AA5
15