Siemens SIPLUS CMS4000 Operating Instructions Manual page 17

Operating Instructions SIPLUS CMS4000 Wiring
Warning
The IFN ADD power cable with Y-plug is designed for max. current load of 4 A .
Maximum 16 IFNs are allowed to be connected in a line.
Notice
CABLE-Power-xxx-0000 (6AT8000-2AB30-1Axx) and CABLE-IEEE1394A-88-0020 (6AT8000-
2AB20-2AD2) must be applied to obtain protection class IP67.
IFN ADD power cable with Y-plug does NOT fulfil protection class IP67 !
Name:
Application:
Length:
Order numbers:
Picture 15 CABLE-IEEE1394A-88
Join the IFN ADD CABLE IEEE1394A and CABLE-IEEE1394A-88 bus connections to
the 8-pole flange sleeves M12 (LNK0 / LNK1/ LNK2) on the front of the device.
Notice
Only join cables of maximum 4.5m length to the IEEE1394 connections. We recommend the
usage of standard SIPLUS CMS cables.
When using self-made cable connections no warrenty is assumed..
Cahrt 2 Pin assignment IEEE1394
PIN Assignment
1 TBIAS *)
2 Wire *)
3 TPA- (Twisted-pair A)
4 TPA+ (Twisted-pair B)
5 Masse
6 TPB+ (Twisted-pair B)
7 TPB- (Twisted-pair A)
8 Power supply *)
*) only relevant while coupling with MCN11
SIPLUS CMS4000 Cable
Operating Instructions, 06/2017, A5E02298098B-01
CABLE-IEEE1394A-88
IEEE1394A coupling cable
IFN-IFN
20cm
CABLE-IEEE1394A-88-0020 (20 cm) 6AT8000-2AB20-2AD2
View
17