Table of Contents
Advertisement
8.14
9.
10.
10.1
10.2
10.3
11.
11.1
11.2
11.3
11.4
12.
12.1
Warning
Prior to installation, read these installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
1. General information
44
44
1.1 Documentation package
44
44
The documentation delivered with the AQpure system comprises:
44
•
Installation and operating instructions for AQpure
45
•
Separate manuals for built-in components
45
The complete documentation package must be available at the
45
installation location at all times.
45
45
1.2 Target group
45
These installation and operating instructions are intended for the
45
users and for the operating company. The document contains
45
general instructions that must be observed during installation,
45
commissioning, operation and maintenance of the system. The
45
responsible staff must read these instructions prior to any work on
45
the system.
45
1.2.1 Qualification and training of staff
46
The staff responsible for the installation, commissioning,
46
operation and maintenance must be qualified for these tasks.
46
46
Areas of responsibility, levels of authority and the supervision of
46
the staff must be precisely defined by the operating company. If
necessary, the staff must be trained.
46
47
Operating company
47
The company or person owning the system is referred to as
48
"operating company" in this document. The operating company
48
has to coordinate the preparation of the installation location. The
installation and the commissioning must be done by certified
service staff. Once the system is in operation, the operating
company has to coordinate the regular maintenance.
Users
The staff responsible for operation and basic maintenance of the
system is referred to as "users" in this document. The users must
be trained on their tasks by the certified service staff during
commissioning.
Certified service staff
The staff responsible for installation, commissioning,
parameterisation and advanced maintenance of the system is
referred to as "certified service staff" in this document. These
persons must be trained and certified for these tasks by
Grundfos.
Grundfos service specialists
Grundfos service specialists are Grundfos employees responsible
for maintenance and repair of Grundfos products and systems.
They possess special knowledge, tools and user rights to perform
service and repair tasks that are not allowed to be performed by
certified service staff or users.
1.2.2 Obligations of the operating company
•
Observe the local safety regulations.
•
Keep the complete documentation package available at the
installation location at all times.
•
Coordinate the preparation of the installation location.
- Provide electrical power.
- Provide a foundation for mechanical installation.
- Provide components and installation material outside the
scope of delivery (external tank, chemical waste tank,
suction line, foot valve, coarse strainer, cables for external
wiring, etc.).
- Provide a pre-treatment installation, if required.
•
Ensure that the users are trained on their tasks by the certified
service staff during commissioning.
•
Provide the stipulated safety equipment and personal
protective equipment.
•
Arrange regular maintenance.
3
Advertisement
Table of Contents
