Commissioning; Product Introduction; Product Description; Applications - Grundfos AQpure Installation And Operating Instructions Manual

Modular water treatment system
Hide thumbs Also See for AQpure:
Table of Contents

Advertisement

5. Commissioning

The system must only be commissioned by certified service staff
according to the separate service instructions, which are supplied
to certified service staff only.

6. Product introduction

6.1 Product description

The Grundfos AQpure water treatment system produces potable
water by filtering bacteria, viruses and particles from raw source
water. The water treatment is based on ultrafiltration (UF)
technology.
Standardised modules that are selected according to the specific
raw water quality on site can be added to the UF module of the
AQpure system.

6.2 Applications

6.2.1 Intended use

The purpose of the Grundfos AQpure water treatment system is
to produce potable water by filtering bacteria, viruses and
particles from certain types of raw source water. The AQpure
system provides a reliable and affordable water supply in urban
or domestic applications, such as commercial buildings, hotels,
industries, and in remote areas, small communities, informal
settlements, temporary camps, emergency or disaster areas.
The water entering the system must meet the feed water
requirements. See section:
11.1.5 Feed water

6.2.2 Improper use

Warning
Improper use, misuse or misapplication can lead to
personal injury and damage to the equipment!
The operational safety of the system is only guaranteed, if it is
used in accordance with section:
The system must not be used in potentially explosive areas.
The system must not be used, if it is damaged.
The system must not be used after improper repair.
The system must not be used after unauthorised modification.
10
requirements.
6.2.1 Intended
use.

6.3 Identification

6.3.1 Nameplate

1
PN:
2
Type:
3
Serial No:
4
U:
5
I :
1/1
6
P1:
p:
bar
7
Tmin amb:
°C
8
Tmin liquid:
°C
9
Net weight:
kg
10
DK-8850 Bjerringbro, Denmark
Fig. 4
Nameplate
Pos. Description
1
Product number
2
Type designation
3
Serial number
4
Voltage
5
Nominal current
6
Nominal power
7
Nominal pressure
8
Min. ambient temperature
9
Min. liquid temperature
10
Weight of the system without water
11
Revision: A, B, C
12
Frequency
Production site (e.g. "P1" for India) followed by a four-
13
digit code for year and week of production (e.g. "1523"
for year 2015 and week 23)
14
Type of ground connection
Fuse rating that should be installed as protection of the
15
system on the power grid
16
Max. short-circuit current
17
Max pressure
18
Max. ambient temperature
19
Max. liquid temperature
20
Country of origin
21
Marks of approval
11
Model:
12
13
PC:
14
V f:
Hz
15
A Max Fuse:
AC
W
I K Max eff:
kA
16
pmax:
bar
17
Tmax amb:
°C
18
Tmax liquid:
°C
19
Assembled in India
20

Advertisement

Table of Contents
loading

Table of Contents