BIOS Setup
BIOS Setup
▶
PCI/PCIE Device Configuration
▶
PCI Latency Timer
Ths tem controls how long each PCI devce can hold the bus before another
takes over. When set to hgher values, every PCI devce can conduct trans-
actons for a longer tme and thus mprove the effectve PCI bandwdth. For
better PCI performance, you should set the tem to hgher values.
▶
USB 2.0 (EHCI) Support
Ths settng dsables/enables the USB EHCI controller. The Enhanced Host
Controller Interface (EHCI) specfcaton descrbes the regster-level nterface
for a Host Controller for the Unversal Seral Bus (USB) Revson 2.0.
▶
Legacy USB Support
Set to [Enabled] f you need to use any USB 1.1/2.0 devce n the operatng
system that does not support or have any USB 1.1/2.0 drver nstalled, such
as DOS and SCO Unx.
▶
Audio Controller
Ths settng enables/dsables the onboard audo controller.
▶
Launch OnBoard LAN OpROM
These settngs enable/dsable the ntalzaton of the onboard/onchp LAN
Boot ROM durng bootup. Selectng [Dsabled] wll speed up the boot proc-
ess.
3-10