Table of Contents
Advertisement
iStartSmart AIO Installation Manual
1.2.2. Room Requirements
The desk has castor wheels, and may be moved anywhere you desire, as long as there is a power
outlet close at hand. Room temperatures and humidity that are suitable for a classroom are
sufficient for the location.
1.3.
Safety
Please read these
Warnings first.
damage to the equipment. Care is required when planning and installing this system.
Warning:
•
It is best to roll the completed desk short distances, rather than lifting.
•
If moving long distances, remove the printer and keyboard before moving.
•
Ensure you do not obscure or block any safety devices, such as fire alarms.
•
Small parts could be swallowed by children and should be kept out of their reach. Keep
your work area segregated from the usual room occupants.
•
Perform all installation work correctly according to this manual.
•
Make sure that all specified screws and brackets are used in the installation.
•
Never attempt to modify the units.
•
Make sure that all screws are tightened after installation and adjustments. There must
be no loose or over tightened screws.
1.4.
Preparing and Tools to Perform the Installation
To complete the installation you will need a few tools, and the knowledge of how to use them.
1.4.1. Needed Tools
•
A measuring tape
•
Diagonal or flush cutters, or a case
cutter or scissors
•
A number 2 cross tip (Phillips)
screwdriver
or
•
A number 2 cross tip, and 4mm Hex bit
•
A hand ratchet for the bit,
or
•
A variable speed drill
Be sure to read this manual prior to installation to
ensure that all safety instructions are observed. These
items must be complied with to prevent injury or
7
Advertisement
Table of Contents
